| Step | | Procedure & Parts & Tools |
| 1 |
|
LOCATE THE DRAIN HOSES ON THE BACK OF THE MACHINE
|
| 2 |
|
REMOVE CAPS, PLACE HOSES NEAR DRAIN AND EMPTY MACHINE
|
| 3 |
|
LOCATE 13MM BOLT ON RIGHT SIDE OF MACHINE, JUST BEHIND THE BRUSH DECK. REMOVE WITH SOCKET.
| Ratchet-Socket metric 13mm |
|
|
| 4 |
|
LIFT THE TANK TO OPEN THE MACHINE
|
| 5 |
|
REMOVE THE CASTER AND ITS 2 ALLEN HEAD BOLTS FROM THE BRUSH HEAD SHROUD.
| Wrench-Allen metric 5.0mm |
|
|
| 6 |
|
REMOVE THE REMAINING ALLEN HEADS FROM THE SHROUD
| Wrench-Allen metric 5.0mm |
|
|
| 7 |
|
LIFT BRUSH SHROUD OFF DECK. IT MAY BE EASIER IF THE DECK IS LOWERED.
|
| 19 |
|
CHECK TENSIONER. MAKE SURE ALL 3 BOLTS ARE TIGHT AND UNIT IS IN THE FULL FORWARD POSITION.
|